IECEX

L'IECEX est le schéma/système de certification de l'IEC conformément à des normes pour les matériels utilisables en atmosphères explosibles.

The objective of the IECEx certification scheme is to facilitate international trade in equipment and services for use in explosive atmospheres (Ex), while maintaining the required level of safety.

Many certification schemes exits at the IECEx level :

  • Certification of equipement
  • Certification of Service Facility
  • Certification of Persons

In this part of the industry-finder Website, we will discuss only of the Certification of equipement.

This certification scheme is a certification according to international standards.

In the following pages you will discover :

  • The functionning of IECEx  - ExTL and ExCB
  • The certification procedure for a manufacturer and the CoC certificate, ExTR and QAR
  • The standards for IECEx equipment certification

 


The functionning of IECEx - ExCB and ExTL

IECEX scheme comprises two king of bodies :

  • the certification bodies (ExCB) that delivers the official documents and
  • The testing laboratories ExTL that are doing the tests for the ExCB

The rules of functionning betwwen the ExTL, ExCB and the IECEx are difined in 2 main documents : 

  1. IECEx 01 : IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) - Basic Rules
  2. IECEx 02 : IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) - IECEx Certified Equipment Scheme covering equipment for use in explosive atmospheres – Rules of Procedure

When a country, ExCB and ExTL accepts to join the IECEx scheme, it engage to respect those rules.

For example in Europe, where ATEX certification is based mainly on certification according standards, when a notied body for ATEX 94/9/EC directive is also an ExCB for IECEx (in the UK for example), then if a product is certified according IECEx rules by and IECEx ExCB that is not a European notified body (in Australia for example), then the UK notified body must accept the findingd of the Australian IECEx ExCB to issue the European official documents :

  • EC type examination certificate
  • Quality assurance notification

that will be based on the australian EXTR (Ex test report) and the QAR (Quality assurance report).

If necessary, the European notified body will proceed to additionnal tests that are required for local regulations.


The certification procedure for a manufacturer and the CoC certificate, ExTR and QAR

The rules specified above On the IECEx certification scheme, are rules for ExCB and ExTL. What is important for a manufacturer is to know how to apply for and IECEx certification and what kind of documents will be delivered.

First of all, the manufacturer need to contact an ExCB that will manage the certification process according the IECEx rules. In most cases, the ExCB has (or  is in contact with) an ExTL.

The process of certification is to perform the tests and analysis that are required by the standards and to perform a quality insurance audit to see if all the measures put in place for manufacturing will allow to manufacture the same product that the one that was certified. After this complete certification process, 3 kinds of documents will be issued is the equipement satisfies the requirements of the standards :

  • an ExTR (Ex Test Report) for the equipment
  • a QAR Quality Assurance Report for each manufacturing place of the certificed product
  •  CoC certificate of conformity. The CoC is not request each time by the manufacturer because in most cases the ExTR and QAR are sufficient

All these documents are available on the IECEX Web site on the followind address www.iecex.com This allows also end used to verify if the Ex equipement they want to purchase is certified or not and if it is alway valid. This allows also European notified bodies to verify if the ExTR an QAR are still valid.

The list of ExCB up to date is defined in the IECEX Web site on the followind address www.iecex.com


The standards for IECEx equipment certification

The IECEx System is based on the use of International Standards, such as IEC Standards. These Standards are dedicated to specialised fields associated with the use of Ex equipment, and industrial places where an explosion risk may exist. The main standards dedicated to Ex and for product certification are described hereafter.

NUMBER

TITLE

60079-0

Explosive atmospheres -

Part 0: Equipment - General requirements

60079-1

Explosive atmospheres -

Part 1: Equipment protection by flameproof enclosures 'd'

60079-2

Explosive atmospheres -

Part 2: Equipment protection by pressurized enclosures 'p'

60079-5

Explosive atmospheres -

Part 5: Equipment protection by powder filling 'q'

60079-6

Explosive atmospheres -

Part 6: Equipment protection by oil immersion 'o'

60079-7

Explosive atmospheres -

Part 7: Equipment protection by increased safety 'e'

60079-11

Explosive atmospheres -

Part 11: Equipment protection by intrinsic safety 'i'

60079-13

Explosive atmospheres -

Part 13: Equipment protection by pressurized room 'p'

60079-15

Explosive atmospheres -

Part 15: Equipment protection by type of protection 'n'

TR 60079-16

Electrical apparatus for explosive gas atmospheres -

Part 16: Artificial ventilation for the protection of analyser (s) houses

60079-18

Explosive atmospheres - 
Part 18: Equipment protection by encapsulation "m"

60079-19

Explosive atmospheres -

Part 19: Equipment repair, overhaul and reclamation

60079-25

Explosive atmospheres -

Part 25: Intrinsically safe systems

60079-26

Explosive atmospheres -

Part 26: Equipment with equipment protection level (EPL) Ga

60079-27

Explosive atmospheres -

Part 27: Fieldbus intrinsically safe concept (FISCO)

60079-28

Explosive atmospheres -

Part 28: Protection of equipment and transmission systems using optical radiation

60079-29-1

Explosive atmospheres -

Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

60079-29-4

Explosive atmospheres -

Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

60079-30-1

Explosive atmospheres -

Part 30-1: Electrical resistance trace heating - General and testing requirements

60079-31

Explosive atmospheres -

Part 31: Equipment dust ignition protection by enclosure "t"

60079-35-1

Explosive atmospheres -

Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

61241-0

Electrical apparatus for use in the presence of combustible dust -

Part 0: General requirements

61241-1

Electrical apparatus for use in the presence of combustible dust -

Part 1: Protection by enclosures 'tD'

61241-1-1

Electrical apparatus for use in the presence of combustible dust -

Part 1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus

61241-4

Electrical apparatus for use in the presence of combustible dust -

Part 4: Type of protection 'pD'

61241-11

Electrical apparatus for use in the presence of combustible dust -

Part 11: Protection by intrinsic safety 'iD'

61241-18

Electrical apparatus for use in the presence of combustible dust -

Part 18: Protection by encapsulation 'mD'

61779-1

Electrical apparatus for the detection and measurement of flammable gases -

Part 1: General requirements and test methods

61779-2

Electrical apparatus for the detection and measurement of flammable gases -

Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air

61779-3

Electrical apparatus for the detection and measurement of flammable gases -

Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air

61779-4

Electrical apparatus for the detection amd measurement of flammable gases -

Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit

61779-5

Electrical apparatus for the detection and measurement of flammable gases -

Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas

62013-1

Caplights for use in mines susceptible to firedamp -

Part 1: General requirements - Construction and testing in relation to the risk of explosion

62013-2

Caplights for use in mines susceptible to firedamp -

Part 2: Performance and other safety-related matters

62086-1

Electrical apparatus for explosive gas atmospheres – 
Electrical resistance trace heating – Part 1: General and testing requirements

80079-34

Explosive atmospheres -

Part 34: Application of quality systems for equipment manufacture

 

 


The countries members of IECEx scheme

Australia (AU)

flag

Brazil (BR)

flag

Canada (CA)

flag

China (CN)

flag

Croatia (HR)

flag

Czech Republic (CZ)

flag

Denmark (DK)

flag

Finland (FI)

flag

France (FR)

flag

Germany (DE)

flag

Hungary (HU)
flag

 

India (IN)
flag

 

Italy (IT)
flag

 

Japan (JP)

flag
 

Korea (KR)

flag

Malaysia (MY)

flag

Netherlands (NL)

flag

New Zealand (NZ)

flag

Norway (NO)

flag

Poland (PL)

flag

Romania (RO)

flag

Russia (RU)

flag

Singapore (SG)

flag

Slovenia (SI)

flag

South Africa (ZA)

flag

Spain (ES)

flag

 

Sweden (SE)

flag

Switzerland (CH)

flag

Turkey (TR)

flag

United Kingdom (GB)

flag

United States of America (US)

flag

 

 

 

 

 

French