- Index
- Bienvenue sur le site WEB "industry-finder".
- Résolution du Conseil, du 7 mai 1985, concernant une nouvelle approche
- Nouveau guide bleu pour la mise en oeuvre des directives européennes pour les produits règles 2016
- l'éco-conception et les produits industriels
- le marquage CE des machines
- Le nouveau guide bleu daté de avril 2014
- Directive Machines
- Historique de la directive machines 2006/42/CE
- Directive machines 2006/42/CE
- Considerants de la directive machines 2006/42/CE
- Articles de la directive machines 2006/42/CE
- Article 1 de la directive machine 2006/42/CE - Champ d'application
- Article 2 de la directive machine 2006/42/CE - Definitions
- Article 3 de la directive machine 2006/42/CE - Directives particulières
- Article 4 de la directive machine 2006/42/CE - Surveillance du marché
- Article 5 de la directive machine 2006/42/CE - Mise sur le marché et mise en service
- Article 6 de la directive machine 2006/42/CE - Libre circulation
- Article 7 de la directive machine 2006/42/CE - Présomption de conformité et normes harmonisées
- Article 8 de la directive machine 2006/42/CE - Mesures spécifiques
- Article 9 de la directive machine 2006/42/CE - Mesures particulières visant des machines potentiellement dangereuses
- Article 10 de la directive machine 2006/42/CE - Procédure de contestation d'une norme harmonisée
- Article 11 de la directive machine 2006/42/CE - Clause de sauvegarde
- Article 12 : Procédures d'évaluation de la conformité des machines - directive machines 2006/42/CE
- Article 13 de la directive machine 2006/42/CE - Procédure pour les quasi-machines
- Article 14 de la directive machine 2006/42/CE - Organismes notifiés
- Article 15 de la directive machine 2006/42/CE - Installation et utilisation des machines
- Article 16 de la directive machine 2006/42/CE - Marquage CE
- Article 17 de la directive machine 2006/42/CE - Marquage non conforme
- Article 18 de la directive machine 2006/42/CE - Confidentialité
- Article 19 de la directive machine 2006/42/CE - Coopération entre les États membres
- Article 20 de la directive machine 2006/42/CE - Voies de recours
- Article 21 de la directive machine 2006/42/CE - Diffusion de l'information
- Article 22 de la directive machine 2006/42/CE - Comité
- Article 23 de la directive machine 2006/42/CE - Sanctions
- Article 24 de la directive machine 2006/42/CE - Modification de la directive 95/16/CE
- Article 25 : Abrogation de la directive machines 2006/42/CE
- Article 26 : Transposition - directive machines 2006/42/CE
- Article 27 : Dérogation - directive machines 2006/42/CE
- Article 28 : Entrée en vigueur - directive machine 2006/42/CE
- Article 29 : Destinataires - directive machine 2006/42/CE
- ANNEXE I de la directive machines - sommaire
- principes généraux - annexe 1 directive machines 2006/42/CE
- 1 EXIGENCES ESSENTIELLES DE SANTE ET DE SECURITE - definitions - Annexe I de la directive machines 2006/42/CE
- Article 1.1.2. Principes d'intégration de la sécurité - Annexe I de la directive machines 2006/42/CE
- Article 1.1.3. Matériaux et produits - Annexe I de la directive machines 2006/42/CE
- Article 1.1.4. Éclairage - Annexe I de la directive machines 2006/42/CE
- Article 1.1.5. Conception de la machine en vue de sa manutention - Annexe I de la directive machines 2006/42/CE
- Article 1.1.6. Ergonomie - Annexe I de la directive machines 2006/42/CE
- Article 1.1.7. Poste de travail - Annexe I de la directive machines 2006/42/CE
- Article 1.1.8. Siège - Annexe I de la directive machines 2006/42/CE
- Article 1.2.1. Sécurité et fiabilité des systèmes de commande - annexe 1 de la directive machines 2006/42/CE
- Article 1.2.2. Organes de service - Annexe I de la directive machines 2006/42/CE
- Article 1.2.2. Organes de service - Annexe I de la directive machines 2006/42/CE
- Article 1.2.3. Mise en marche - Annexe I de la directive machines 2006/42/CE
- Articles 1.2.4. Arrêt, arrêt normal, arrêt d'urgence - Annexe I de la directive machines 2006/42/CE
- Article 1.2.4.4. Ensembles de machines - Annexe I de la directive machines 2006/42/CE
- Article 1.2.5. Sélection des modes de commande ou de fonctionnement - Annexe I de la directive machines 2006/42/CE
- Article 1.2.6. Défaillance de l'alimentation en énergie - Annexe I de la directive machines 2006/42/CE
- Article 1.3. MESURES DE PROTECTION CONTRE LES RISQUES MÉCANIQUES - Annexe I de la directive machines 2006/42/CE
- Article 1.4. CARACTÉRISTIQUES - PROTECTEURS ET DISPOSITIFS DE PROTECTION - Annexe I de la directive machines 2006/42/CE
- Article 1.5. RISQUES DUS À D'AUTRES DANGERS - Annexe I de la directive machines 2006/42/CE
- Article 1.6. ENTRETIEN - Annexe I de la directive machines 2006/42/CE
- Article 1.7. INFORMATION - Annexe I de la directive machines 2006/42/CE
- Article 2. EXIGENCES COMPLÉMENTAIRES POUR CERTAINES CATÉGORIES DE MACHINES - Annexe I de la directive machines 2006/42/CE
- Article 3. EXIGENCES POUR PALLIER LES DANGERS DUS À LA MOBILITÉ DES MACHINES - Annexe I de la directive machines 2006/42/CE
- Article 4. EXIGENCES COMPLÉMENTAIRES - DANGERS DUS AUX OPÉRATIONS DE LEVAGE - Annexe I directive machines 2006/42/CE
- Article 5. EXIGENCES COMPLÉMENTAIRES MACHINES DESTINÉES À DES TRAVAUX SOUTERRAINS - Annexe I de la directive machines 2006/42/CE
- Article 6. EXIGENCES COMPLÉMENTAIRES DANGERS DUS AU LEVAGE DE PERSONNES - Annexe I de la directive machines 2006/42/CE
- Annexe II de la directive machines 2006/42/CE - déclaration CE de conformité
- Annexe III de la directive machines 2006/42/CE - marquage CE
- Annexe IV de la directive machines 2006/42/CE
- Annexe V de la directive machines 2006/42/CE - Liste des composants de sécurité
- Annexe VI de la directive machines 2006/42/CE - Notice d'assemblage d'une quasi-machine
- Annexe VII de la directive machines 2006/42/CE - Dossier technique pour les machines et les quasi-machines
- Annexe VIII directive machines 2006/42/CE - Évaluation de la conformité avec contrôle interne de fabrication d'une machine
- Annexe IX de la directive machines 2006/42/CE - Examen CE de type
- Annexe X de la directive machines 2006/42/CE - Assurance qualité complète
- Annexe XI directive machines 2006/42/CE - Critères minimaux pour la notification des organismes notifiés
- Annexe XII directive machines 2006/42/CE - Tableau de correspondance entre directive machines 2006/42/CE et directive 1998/37/CE
- Directive machines 98/37/CE
- considérants de la directive machines 1998/37/CE
- articles de la directive machines 1998/37/CE
- Annexe I de la directive machines 1998/37/CE
- Annexe II de la directive machines 1998/37/CE
- Annexe III de la directive machines 1998/37/CE
- Annexe IV de la directive machines 1998/37/CE
- Annexe V de la directive machines 1998/37/CE
- Annexe VI de la directive machines 1998/37/CE
- Annexe VII de la directive machines 1998/37/CE
- Annexe VIII de la directive machines 1998/37/CE
- Annexe IX de la directive machines 1998/37/CE
- Directive machines 1989/392/CE
- Considérants de la directive machines 1989/392/CEE
- articles de la directive machines 1989/392/CEE
- Annexe I de la directive machines 1989/392/CEE
- Annexe II de la directive machines 1989/392/CEE
- Annexe III de la directive machines 1989/392/CEE
- Annexe IV de la directive machines 1989/392/CEE
- Annexe V de la directive machines 1989/392/CEE
- Annexe VI de la directive machines 1989/392/CEE
- Annexe VII de la directive machines 1989/392/CEE
- Amendements de la directive machines 1989/392/CEE
- guide de la Direction Générale du Travail modifications de machines
- Directives ATEX
- Directive ATEX 94/9/CE
- Considerants de la directive ATEX 94/9/CE
- Articles de la directive ATEX 94/9/CE
- Article 1 de la directive ATEX 94/9/CE
- Article 2 de la directive ATEX 94/9/CE
- Article 3 de la directive ATEX 94/9/CE
- Article 4 de la directive ATEX 94/9/CE
- Article 5 de la directive ATEX 94/9/CE
- Article 6 de la directive ATEX 94/9/CE
- Article 7 de la directive ATEX 94/9/CE
- Article 8 de la directive ATEX 94/9/CE
- Article 9 de la directive ATEX 94/9/CE
- Article 10 de la directive ATEX 94/9/CE
- Article 11 de la directive ATEX 94/9/CE
- Article 12 de la directive ATEX 94/9/CE
- Article 13 de la directive ATEX 94/9/CE
- Article 14 de la directive ATEX 94/9/CE
- Article 15 de la directive ATEX 94/9/CE
- Article 16 de la directive ATEX 94/9/CE
- ANNEXE I de la directive ATEX 94/9/CE : CRITÈRES DÉTERMINANT LA CLASSIFICATION DES GROUPES D'APPAREILS EN CATeGORIES
- ANNEXE II de la directive ATEX 94/9/CE : EXIGENCES ESSENTIELLES DE SeCURITe ET de SANTE
- ANNEXE III de la directive ATEX 94/9/CE : MODULE: EXAMEN CE DE TYPE
- ANNEXE IV de la directive ATEX 94/9/CE : MODULE: ASSURANCE QUALITE DE PRODUCTION
- ANNEXE V de la directive ATEX 94/9/CE : MODULE VÉRIFICATION SUR PRODUIT
- ANNEXE VI de la directive ATEX 94/9/CE : MODULE CONFORMITE AU TYPE
- ANNEXE VII de la directive ATEX 94/9/CE : MODULE ASSURANCE QUALITE DU PRODUIT
- ANNEXE VIII de la directive ATEX 94/9/CE : MODULE CONTROLE INTERNE DE FABRICATION
- ANNEXE IX de la directive ATEX 94/9/CE : MODULE: VERIFICATION À L'UNITE
- ANNEXE X de la directive ATEX 94/9/CE : marquage CE et contenu de la declaration CE de conformite
- ANNEXE XI de la directive ATEX 94/9/CE: NOTIFICATION DES ORGANISMES
- Directive ATEX 99/92/CE
- Directive ATEX 2014/34/UE
- Considérants de la directive ATEX 2014/34/UE
- les articles de la directive ATEX 2014/34/UE
- Annexe 1 de la directive ATEX 2014/34/UE
- Annexe 2 de la directive ATEX 2014/34/UE
- Annexe 3 de la directive ATEX 2014/34/UE
- Annexe 4 de la directive ATEX 2014/34/UE
- Annexe 5 de la directive ATEX 2014/34/UE
- Annexe 6 de la directive ATEX 2014/34/UE
- Annexe 7 de la directive ATEX 94/9/EC
- Annexe 8 de la directive ATEX 2014/34/UE
- Annexe 9 de la directive ATEX 2014/34/UE
- Annexe 10 de la directive ATEX 2014/34/UE
- Annexe 11 de la directive ATEX 2014/34/UE
- Annexe 12 de la directive ATEX 2014/34/UE
- La nouvelle directive ATEX
- Audits dans le domaine Ex - EN 13980, OD 005 et EN ISO / CEI 80079-34
- La déclaration CE de conformité en ATEX
- Directive ATEX 94/9/CE
- IECEX
- Normalisation & réglementation européenne
- Sécurité des machines - réglementation européenne et normalisation
- Réglementation européenne sur les machines - normes harmonisées
- Sécurité des machines : normalisation et réglementation européenn
- Normalisation dans le secteur des machines
- FD ISO/TR 14121-2 - Février 2008
- ISO 11161:2007
- ISO 13849-1:2006
- ISO 13849-2:2012
- ISO 13850:2006 - Sécurité des machines -- Arrêt d'urgence -- Principes de conception
- ISO 13851:2002 - Sécurité des machines -- Dispositifs de commande bimanuelle -- Aspects fonctionnels et principes de conception
- ISO 13854:1996 - Sécurité des machines -- Écartements minimaux pour prévenir les risques d'écrasement de parties du corps humain
- ISO 13854:1996 Sécurité des machines -- Écartements minimaux pour prévenir les risques d'écrasement de parties du corps humain
- ISO 13855:2010 - Safety of machinery -- Positioning of safeguards with respect to the approach speeds of parts of the human body
- ISO 13856-1:2013 Sécurité des machines -- Dispositifs de protection sensibles à la pression -- Partie 1
- ISO 13856-2:2013 - Sécurité des machines -- Dispositifs de protection sensibles à la pression -- Partie 2: Principes généraux
- ISO 13856-3:2013 Sécurité des machines -- Dispositifs de protection sensibles à la pression - Partie 3
- ISO 13857:2008 Sécurité des machines - Distances de sécurité - zones dangereuses
- ISO 14119:2013- Dispositifs de verrouillage associés à des protecteurs
- ISO 14120:2002 -Protecteurs - Prescriptions generales pour la conception et la construction
- ISO 14122-2:2001 - Moyens d'acces permanents aux machines
- ISO 14122-3:2001- Moyens d'acces permanents aux machines
- ISO 14122-4:2004 - Moyens d'acces permanents aux machines
- ISO 14123-1:1998 - Reduction des risques pour la sante resultant de substances dangereuses emises par des machines
- ISO 14123-2:1998 - Reduction des risques pour la sante resultant de substances dangereuses emises par des machines -- Partie 2
- ISO 14159:2002 - Prescriptions relatives à l'hygiene lors de la conception des machines
- ISO 19353:2005 Securite des machines - Prevention et protection contre l'incendie
- ISO/DTR 22100-2 - Securite des machines - Partie 2: La relation entre l'ISO 12100 et l'ISO 13849
- ISO/TR 14121-2:2012 - Appréciation du risque - Partie 2: Lignes directrices pratiques et exemples
- ISO/TR 18569:2004 - Lignes directrices pour la comprehension et l'utilisation des normes sur la securite des machines
- ISO/TR 23849:2010 - Lignes directrices relatives à l'application de l'ISO 13849-1 et de la CEI 62061
- NF EN ISO 12100 Novembre 2010
- NF EN ISO 12100-1 - Janvier 2004
- NF EN ISO 12100-1/A1 Août 2009
- NF EN ISO 12100-2 JANVIER 2004
- NF EN ISO 12100-2/A1 Août 2009
- NF EN ISO 14121-1 - Novembre 2007
- Liste des normes harmonisées - directive machines 2006/42/CE
- Liste des normes harminisées - directive machines 2006/42/CE - 09.06.2017
- Liste des normes harmonisées - directive machines - OJ C 2016/C173/01 du 15/05/2016
- Liste des normes harmonisées - directive machines 2006/42/CE - corrigendum OJ C 2015/C 087/03 du 13/03/2015
- Liste des normes harmonisées - directive machines - OJ C 2015/C 054/01 du 13/02/2015
- Liste des normes harmonisées - directive machines - OJ C 220 du 11/07/2014
- Liste des normes harmonisées - directive machines - OJ C 110 du 11/04/2014
- Liste des normes harmonisées - directive machines - OJ C 348 du 28/11/2013
- Liste des normes harmonisées directive machines - OJ C 099 du 05/04/2013
- Guide d'application de la directive machines 2006/42/CE, recommendations for use - normes harmonisées
- recommendation for use - directive machines 2006/42/CE
- Organismes notifiés au titre de la directive machines 2006/42/CE
- Sécurité de matériels et équipements EX, IECEx : Normalisation - réglementation européenne
- Normalisation dans le domaine des ATEX et des Ex
- liste des normes harmonisées - directive ATEX 94/9/CE
- Liste des normes harmonisées directive ATEX 2014/34/UE - 12-10-2018
- Harmonized standards list ATEX 94/9/EC directive - OJ C 126 - 08/04/2016
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ C 335 - 09/10/2015
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ-C 445-02 - 12/12/2014
- Liste des normes harmonisées directive ATEX 94/9/CE - OJ-C 076-14/03/2014
- Liste des normes harmonisées - directive ATEX 94/9/CE - OJ-C 319 05/11/2013
- Réglementation européenne pour la directive ATEX 94/9/CE
- Guide d'application de la directive ATEX 94/9/CE
- Guide d'application de la directive ATEX 2014/34/UE
- Alignement de dix directives d’harmonisation technique sur la décision n° 768/2008/CE
- Sécurité des machines - réglementation européenne et normalisation
- Dernières news
- Sécurité fonctionnelle
- Les dispositifs de sécurité en ATEX
- Historique des normes de sécurité fonctionnelle et directive machines
- Sécurité fonctionnelle
- Principes de sécurité éprouvés : l'action mécanique positive
- la sécurité fonctionnelle et les réseaux de terrain
- les microprocesseurs dans les techniques de sécurité
- principes de conception sûr - Les relais de sécurité et les machines
- prévention de la mise en marche intempestive norme EN 1037+A1
- Sécurité fonctionnelle - les codes détecteurs d'erreur - parité et chechsum
- Sécurité fonctionnelle - les codes détecteurs d'erreur - le CRC et les codes de Hamming
- Nouveau règlement machines 2023/1230
Guide to application of ATEX 2014/34/EU directive second edition
The European Commission has published the ATEX 2014/34/UE guide lines 2nd edition December 2017.
You can find the official document on the european commission website and on the following page :
Guide to application of the ATEX Directive 2014/34/EU-second edition in PDF
The guide that was published before is presented here after
Guide to application of the ATEX Directive 2014/34/EU
- These ATEX Guidelines are intended to be a manual for all parties directly or indirectly affected by Directive 2014/34/EU[1], commonly referred to as the ATEX ("Atmosphères explosibles") "product" directive, applicable from 20 April 2016, replacing the previous Directive 94/9/EC applicable from 1 July 2003 until 19 April 2016.
- Readers' attention is drawn to the fact that these Guidelines are intended only to facilitate the application of Directive 2014/34/EU, and it is the relevant national transposition of the text of the Directive which is legally binding. However, this document does represent a reference for ensuring consistent application of the Directive by all interested parties and stakeholders. The ATEX Guidelines are intended to help ensure the free movement of products within the scope of the ATEX Directive in the European Union[2] by consensus amongst Member States' government experts and other parties concerned.
- These Guidelines have been prepared by the competent services of the Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs (DG Growth)[3], in co-operation with representatives and experts from EU Member States, European standardisation, notified bodies, industry and other relevant sectoral stakeholders, with the specific contribution of the "New ATEX Guidelines Editorial Group (NAGEG)". They are based on the last issue (4th Edition - September 2012 - Revision December 2013) of the Guidelines on the application of Directive 94/9/EC, applicable until 19 April 2016, as well as on other horizontal and vertical guidance documents.
- The European Commission services will undertake to maintain these Guidelines. It is our goal to ensure that the information provided is both timely and accurate. If errors are brought to our attention, we will try to correct them as soon as possible. However, the Commission accepts no responsibility or liability whatsoever with regard to the information in this document.
This information is:
- of a general nature only and is not intended to address the specific circumstances of any particular individual or entity;
- not necessarily comprehensive, complete, accurate or up-to-date;
- sometimes refers to external information over which the Commission services have no control and for which the Commission assumes no responsibility;
- not professional or legal advice.
- All references to the CE marking and the EU declaration of conformity in these ATEX Guidelines relate only to the Directive 2014/34/EU. To place products falling under Directive 2014/34/EU in the European Union territory, all other relevant legislation must be applied. For wider information on the whole system, see the latest version of "The 'Blue Guide' on the implementation of EU product rules", available in all the EU official languages on http://ec.europa.eu/DocsRoom/documents/18027.
- Further guidance, especially concerning specific types of products, can be found on the European Commission's website on EUROPA regarding ATEX: http://ec.europa.eu/growth/sectors/mechanical-engineering/atex/.
Any query can be addressed to the GROW ATEX functional mailbox: GROW-DIR-ATEX@ec.europa.eu.
Introduction
The objective of these ATEX Guidelines is to clarify certain matters and procedures referred to in Directive 2014/34/EU1 concerning equipment and protective systems intended for use in potentially explosive atmospheres. The Guidelines should be used in conjunction with the Directive itself and with the European Commission's document "The 'Blue Guide' on the implementation of EU product rules"[4].
These Guidelines are not only for the use of Member States’ competent authorities, but also by the main economic operators concerned, such as manufacturers, their trade associations, bodies in charge of the preparation of standards as well as those entrusted with the conformity assessment procedures.
First and foremost, this document must ensure that, when correctly applied, the Directive leads to the removal of obstacles and difficulties related to the free circulation (free movement) of goods within the European Union (EU) and the European Economic Area (EEA). It should be noted that the statements in these Guidelines refer only to the application of Directive 2014/34/EU unless otherwise indicated. All parties concerned should be aware of other requirements, which may also apply.
Directive 2014/34/EU is a total harmonisation directive and a "New Approach"[5] directive aligned to the New Legislative Framework. It lays down essential health and safety requirements and leaves it to standards, primarily European harmonised standards, to give technical expression of the relevant requirements contained in the Directive.
The ATEX Directive 2014/34/EU replaced the previous ATEX Directive 94/9/EC which was applicable between 1 July 2013 and 19 April 2016. As of 20 April 2016, Directive 2014/34/EU, as transposed into the national legislation of the EU Member States, is the sole legal instrument applicable.
The reader will want to be aware that where ATEX products are intended for use in a place of work, national and EU legislation, intended to ensure the safety of employees, will usually apply. In this respect different legislation applies to land based industries, the underground extraction of coal and other minerals, and offshore oil production[6].
Table of Content
Preamble to the ATEX Directive - The Citations and the Recitals
|
||
|
||
|
§ 3 |
The recitals |
Recital 1 |
§ 4 |
The previous ATEX Directive |
Recitals 2, 3 |
§ 5 |
The New Legislative Framework |
Recitals 4, 5 |
§ 6 |
The scope of the ATEX Directive |
Recital 6 |
§ 7 |
Health and safety |
Recital 7 |
§ 8 |
Protection against explosion hazards |
Recitals 8, 9 |
§ 9 |
Safety of ATEX equipment and protective systems: essential health and safety requirements |
Recitals 10, 11, 12 |
§ 10 |
Responsibilities of economic operators |
Recital 13 |
§ 11 |
Responsibilities of manufacturers: conformity assessment |
Recitals 14, 15 |
§ 12 |
Responsibilities of importers |
Recital 16 |
§ 13 |
Responsibilities of distributors |
Recital 17 |
§ 14 |
Obligations of the manufacturer for economic operators |
Recitals 18, 19 |
§ 15 |
Information and traceability of products for market surveillance |
Recital 20 |
§ 16 |
Essential health and safety requirements: presumption of conformity from harmonised standards |
Recital 21 |
§ 17 |
Formal objections to harmonised standards |
Recital 22 |
§ 18 |
Conformity assessment procedures |
Recitals 23, 24 |
§ 19 |
EU declaration of conformity |
Recital 25 Recitals 26, 27, 28, 29, |
§ 20 |
The CE marking |
30, 31, 32, 33, 34, 35 |
§ 21 |
Conformity assessment bodies: notified bodies |
Recitals 36, 37 |
§ 22 |
Compliance of products placed on the market and market surveillance |
Recitals 38, 39, 40 |
§ 23 |
The safeguard clause procedure |
Recitals 41, 42, 43, 44 |
§ 24 |
Implementing powers and procedures |
Recitals 45, 46 |
§ 25 |
The ATEX Committee |
Recital 47 |
§ 26 |
Implementing acts concerning measures on noncompliant products |
Recital 48 |
§ 27 |
Enforcement: penalties |
Recital 49 |
§ 28 |
Transitional arrangements |
Recital 50 |
§ 29 |
Subsidiarity and proportionality |
Recitals 51, 52 |
§ 30 |
Transposition |
The articles of 2014/34/EU directive
Article 1 |
§ 31 |
General provisions |
|
|
§ 32 |
Products covered by the ATEX Directive |
|
|
§ 33 |
Used, repaired or modified products and spare parts |
|
|
§ 34 |
Place of intended use |
|
|
§ 35 |
Interface to different potentially explosive atmospheres |
|
|
§ 36 |
Safety devices, controlling devices and regulating devices as defined in Article 1(b) |
|
|
§ 37 |
Products excluded from the scope of the ATEX Directive |
|
|
§ 38 |
Examples of equipment not covered by Directive 2014/34/EU |
|
Article 2 |
§ 39 |
Definitions |
|
|
§ 40 |
Equipment |
|
|
§ 41 |
"Own" ignition source |
|
|
§ 42 |
Non-electrical equipment |
|
|
§ 43 |
Electrical equipment |
|
|
§ 44 |
Combined equipment (assemblies) |
|
|
§ 45 |
Protective systems |
|
|
§ 46 |
Components |
|
|
§ 47 |
Difference between equipment and components. Specific requirements given in the manual of products |
|
|
§ 48 |
Examples and problems on equipment and components |
|
|
§ 49 |
Explosive atmosphere and potentially explosive atmosphere |
|
|
§ 50 |
Potentially explosive atmosphere in the sense of Directive 2014/34/EU |
|
|
§ 51 |
Equipment group and category |
|
|
§ 52 |
Intended use |
|
|
§ 53 |
Making available on the market |
|
|
§ 54 |
Placing on the market |
|
|
§ 55 |
Manufacturer |
|
|
§ 56 |
Authorised representative |
|
|
§ 57 |
Importer |
|
|
§ 58 |
Distributor |
|
|
§ 59 |
Economic operators |
|
|
§ 60 |
Technical specification |
|
|
§ 61 |
Harmonised standard |
|
|
§ 62 |
Accreditation and national accreditation body |
|
|
§ 63 |
Conformity assessment |
|
|
§ 64 |
Recall and withdrawal |
|
|
§ 65 |
Union harmonisation legislation |
|
|
§ 66 |
CE marking |
|
Article 3 |
§ 67 |
Making available on the market and putting into service |
|
|
§ 68 |
Making available ATEX products on the market |
|
|
§ 69 |
Placing ATEX products on the market |
|
|
§ 70 |
Putting ATEX products into service |
|
Article 4 |
§ 71 |
Essential health and safety requirements |
|
Article 5 |
§ 72 |
Free movement |
|
|
§ 73 |
Obligations of economic operators |
|
Article 6 |
§ 74 |
Obligations of manufacturers |
|
|
§ 75 |
Use of subcontractor services by a manufacturer |
|
|
§ 76 |
Manufacturers and conformity assessment based on quality assurance (Annex IV, Annex VII) |
|
|
§ 77 |
Certificates and CE marking without the name of the original manufacturer |
|
|
§ 78 |
Manufacturing of ATEX products for own use |
|
|
§ 79 |
The official languages of the European Union |
|
Article 7 |
§ 80 |
Authorised representatives |
|
Article 8 |
§ 81 |
Obligations of importers |
|
Article 9 |
§ 82 |
Obligations of distributors |
|
Article 10 |
§ 83 |
Obligations of manufacturers for importers and distributors |
|
Article 11 |
§ 84 |
Identification of economic operators |
|
|
§ 85 |
Conformity of the product |
|
Article 12 |
§ 86 |
Presumption of conformity of products |
|
|
§ 87 |
European harmonised standards in the Official Journal |
|
|
§ 88 |
Standardisation programme |
|
Article 13 |
§ 89 |
Conformity assessment procedures |
|
|
§ 90 |
Conformity assessment procedures in the case of different categories within one product |
|
|
§ 91 |
Clarification for equipment with categories 2 or 3 |
|
|
§ 92 |
Exceptional derogations of the conformity assessment procedures |
|
Article 14 |
§ 93 |
EU declaration of conformity |
|
|
§ 94 |
Written attestation of conformity for components |
|
Articles 15, 16 |
§ 95 |
The CE marking. Rules and conditions for affixing the CE marking and other markings |
|
|
§ 96 |
Notification of conformity assessment bodies: notified bodies |
|
Article 17 |
§ 97 |
Notification |
|
Article 18 |
§ 98 |
Notifying authorities |
|
Article 19 |
§ 99 |
Requirements relating to notifying authorities |
|
Article 20 |
§ 100 |
Information obligation on notifying authorities |
|
Article 21 |
§ 101 |
Requirements relating to notified bodies |
|
Article 22 |
§ 102 |
Presumption of conformity of notified bodies |
|
Article 23 |
§ 103 |
Subsidiaries of and subcontracting by notified bodies |
|
Articles 24, 25 |
§ 104 |
Application for notification and notification procedure |
|
Article 26 |
§ 105 |
Identification numbers and lists of notified bodies. The NANDO database |
|
Article 27 |
§ 106 |
Changes to notification |
|
Article 28 |
§ 107 |
Challenge of the competence of notified bodies |
|
Article 29 |
§ 108 |
Operational obligations of notified bodies |
|
|
§ 109 |
Documents issued by the notified body |
|
|
§ 110 |
Provision of evaluation and test results with EUtype examination certificates |
|
|
§ 111 |
Acceptance of test results of manufacturers by a notified body |
|
§ 112 |
Minimum content of a European standardised ATEX test and assessment report |
|
§ 113 |
Retention of technical documentation |
Article 30 |
§ 114 |
Appeal against decisions of notified bodies |
Article 31 |
§ 115 |
Information obligation on notified bodies |
Article 32 |
§ 116 |
Exchange of experience |
Article 33 |
§ 117 |
Coordination of notified bodies. The European ATEX Notified Bodies Group (ExNBG) |
|
§ 118 |
Status and use of ExNBG Clarification Sheets issued by the European ATEX Notified Bodies Group |
|
§ 119 |
EU market surveillance, control of products entering the EU market and EU safeguard procedure |
Article 34 |
§ 120 |
EU market surveillance and control of products entering the EU market |
Article 35 |
§ 121 |
Procedure for dealing with products presenting a risk at national level |
Article 36 |
§ 122 |
EU safeguard procedure |
Article 37 |
§ 123 |
Compliant products which present a risk |
Article 38 |
§ 124 |
Formal non-compliance |
|
§ 125 |
Committee, transitional and final provisions |
Article 39 |
§ 126 |
The ATEX Committee |
Article 40 |
§ 127 |
Enforcement: penalties |
Article 41 |
§ 128 |
Transitional provisions |
Article 42 |
§ 129 |
Transposition |
Article 43 |
§ 130 |
Repeal |
Article 44 |
§ 131 |
Entry into force and application |
Article 45 |
§ 132 |
Addresses |
The Annexes to the ATEX Directive
The Annexes to the ATEX Directive
Annex I - Criteria determining the classification of equipment-groups into categories
§ 133 Classification of equipment-groups into categories
1. Equipment-group I
§ 134 Equipment-group I, category M1
§ 135 Equipment-group I, category M2
2. Equipment-group II
§ 136 Equipment-group II, category 1
§ 137 Equipment-group II, category 2
§ 138 Equipment-group II, category 3
Annex II - Essential health and safety requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres
§ 139 Essential health and safety requirements
§ 140 Preliminary observations
1. Common requirements for Equipment and protective systems
1.0. |
§ 141 |
General requirements |
1.0.1., 1.0.2. |
§ 142 |
Principles of integrated explosion safety. Risk assessment for ATEX products |
1.0.3., 1.0.4. |
§ 143 |
Special conditions: checking, maintenance, surrounding area |
1.0.5. |
§ 144 |
Marking |
|
§ 145 |
CE marking |
|
§ 146 |
Supplementary/specific marking |
|
§ 147 |
Additional marking for standards |
|
§ 148 |
Marking of small products |
|
§ 149 |
Marking of components |
|
§ 150 |
Marking of assemblies |
1.0.6. |
§ 151 |
Instructions |
1.1., 1.1.1, 1.1.2., 1.1.3 |
§ 152 |
Selection of materials |
1.2., 1.2.1., 1.2.2. |
§ 153 |
Design and construction |
1.2.3. |
§ 154 |
Enclosed structures and prevention of leaks |
1.2.4 |
§ 155 |
Dust deposits |
1.2.5 |
§ 156 |
Additional means of protection |
1.2.6 |
§ 157 |
Safe opening |
1.2.7 |
§ 158 |
Protection against other hazards |
1.2.8 |
§ 159 |
Overloading of equipment |
1.2.9 |
§ 160 |
Flameproof enclosure systems |
1.3. |
§ 161 |
Potential ignition sources |
1.3.1. |
§ 162 |
Hazards arising from different ignition sources |
1.3.2. |
§ 163 |
Hazards arising from static electricity |
1.3.3. |
§ 164 |
Hazards arising from stray electric and leakage currents |
1.3.4. |
§ 165 |
Hazards arising from overheating |
1.3.5. |
§ 166 |
Hazards arising from pressure compensation operations |
1.4., 1.4.1., 1.4.2. |
§ 167 |
Hazards arising from external effects |
- 5., 1.5.1., 1.5.2., 1.5.3. § 168 Requirements in respect of safety-related devices
1.5.4. |
§ 169 |
Control and display units |
1.5.5., 1.5.6, 1.5.7. |
§ 170 |
Requirements in respect of devices with a measuring function for explosion protection |
1.5.8. |
§ 171 |
Risks arising from software |
1.6., 1.6.1., 1.6.2. |
§ 172 |
Integration of safety requirements relating to the system |
1.6.3. |
§ 173 |
Hazards arising from power failure |
1.6.4. |
§ 174 |
Hazards arising from connections |
1.6.5. |
§ 175 |
Placing of warning devices as part of equipment |
- Supplementary requirements in respect of equipment
§ 176 Supplementary requirements in respect of equipment
- Supplementary requirements in respect of protective systems
- 177 Supplementary requirements in respect of protective systems
Annex III - Module B: EU-type examination
1., 2. § 178 EU-type examination
3. § 179 The application for EU-type examination
4. § 180 Tasks to be performed by the notified body
5. § 181 The evaluation report
6. § 182 The EU-type examination certificate
§ 183 The EU-type examination certificate and the responsibilities of stakeholders
7. § 184 Changes and modifications
§ 185 Obligations for the notified body 186 Validity of EU-type examination certificates
8. § 187 Obligations for the manufacturer
9. § 188 Authorised representative
Annex IV - Module D: Conformity to type based on quality assurance of the production process
1. § 189 Conformity to type based on quality assurance of the production process
2. § 190 Manufacturing
3. § 191 Quality system
4.
§ 192 Surveillance under the responsibility of the notified body
5. § 193 CE-marking, EU declaration of conformity and attestation of conformity
6. § 194 Obligations for the manufacturer: retention of documentation - quality assurance
7. § 195 Obligations for the notified body
8. § 196 Authorised representative
Annex V - Module F: Conformity to type based on product verification
1. § 197 Conformity to type based on product verification
2. § 198 Manufacturing
3., 4. § 199 Verification
5. § 200 CE-marking, EU declaration of conformity and attestation of conformity
6. § 201 The notified body’s identification number
7. § 202 Authorised representative
Annex VI - Module C1: Conformity to type based on internal production control plus supervised product testing
1. § 203 Conformity to type based on internal production control plus supervised product testing
2. § 204 Manufacturing
3. § 205 Product checks
4. § 206 CE-marking, EU declaration of conformity and attestation of conformity
5. § 207 Authorised representative
Annex VII - Module E: Conformity to type based on product quality assurance
1. § 208 Conformity to type based on product quality assurance
2. § 209 Manufacturing
3. § 210 Quality system
4. § 211 Surveillance under the responsibility of the notified body
5. § 212 CE-marking, EU declaration of conformity and attestation of conformity
6. § 213 Obligations for the manufacturer
7. § 214 Obligations for the notified body
8. § 215 Authorised representative
Annex VIII - Module A: Internal product control
1. § 216 Internal product control
2. § 217 Technical documentation
3. § 218 Manufacturing
4. § 219 CE-marking, EU declaration of conformity and attestation of conformity
5.
§ 220 Authorised representative
Annex IX - Module G: Conformity based on unit verification
1. § 221 Conformity based on unit verification
2. § 222 Technical documentation
3. § 223 Manufacturing
4. § 224 Verification
5. § 225 CE-marking, EU declaration of conformity and attestation of conformity
6. § 226 Authorised representative
Annex X - EU declaration of conformity |
§ 227 The EU declaration of conformity |
Annex XI |
§ 228 References of the repealed Directive |
Annex XII - Correlation table |
§ 229 Correlation table |
Statement of the European Parliament |
§ 230 Statement of the European Parliament |
Application of Directive 2014/34/EU alongside others that may apply
§ 231 |
Electromagnetic Compatibility Directive 2014/30/EU (EMC) |
§ 232 |
Low Voltage Directive 2014/35/EU (LVD) |
§ 233 |
Machinery Directive 2006/42/EC |
§ 234 |
Transport of Dangerous Goods Directives 2008/68/EC and 98/91/EC (ADR) |
§ 235 |
Personal Protective Equipment Directive 89/686/EEC (PPE) |
§ 236 |
Pressure Equipment Directive 2014/68/EU (PED) and Simple Pressure Vessels Directive 2014/29/EU (SPVD) |
§ 237 |
Radio Equipment Directive 2014/53/EU (RED) |
§ 238 |
Gas Appliances Directive 2009/142/EC (GAD) |
§ 239 |
Construction Products Regulation (EU) No 305/2011 (CPR) |
§ 240 |
Marine Equipment Directive 2014/90/EU (MED) |
Application of Directive 2014/34/EU to specific equipment
§ 241 |
Inerting systems |
§ 242 |
Paint spray booths |
§ 243 |
Filter units and vented silo bins |
§ 244 |
Gas turbines |
§ 245 |
Steam turbines |
§ 246 |
Petrol pumps |
§ 247 |
Cables |
§ 248 |
Rotating mechanical seals |
§ 249 |
Bucket elevators |
§ 250 |
Fork lift trucks |
§ 251 |
Transportable, pressurised cabins ("modules") |
§ 252 |
Automatically lubricating systems |
§ 253 |
Electrical trace heating systems |
§ 254 |
Motor protection for category 3 motors |
§ 255 |
Wi-Fi access points |
§ 256 |
Refrigerators and storage cabinets for volatile substances |
Borderline list – ATEX products
Specific marking of explosion protection (ex) drawn from Directive 84/47/EEC
Useful ATEX websites
[1] Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast) (OJEU L 96, 29.3.2014, p. 309).
[2] According to the agreement related to the European Economic Area (EEA) (Decision of the Council and the Commission 94/1/EC of 13 December 1993, OJ L1, 3.1.1994, p.1), the territories of Iceland, Liechtenstein and Norway have to be considered, for the implementation of Directive 2014/34/EU, in the same right as of the EU territory. When this term, EU territory, is used in this Guide, the same applies to the EEA territory.
[3] The former Directorate-General for Enterprise and Industry, until 31 October 2014.
[5] Council Resolution of 7 May 1985 on a new approach to technical harmonization and standards (OJ C 136, 4.6.1985, p. 1).
[6] Among others, the ATEX "workplace" Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres (OJ L 23, 28.1.2000, p. 57).
English